Jacques SENAQUE

En résumé

Entreprises

• Total Uk Shetland - INSTRUMENT SUPERVISOR

  2014 - maintenant Instrument Construction Supervisor
  TOTAL UK
  May 2014 – Present (4 months)SGP (Shetland Islands-Scotland)
  Mission.
  
  • Supervise the project ESPCC Contractor Petrofact with regard to Instrumentation activities in order to as certain that the plant will be built as per drawings, specifications, procedures, cost and schedule.
  
  • Demonstrate personal commitment to the HSE Policy, Maintain awareness of and ensure compliance with all relevant Statutory and Company HSE standards, actively participate in Company safety awareness and initiative schemes.
  
  Activities.
  
  • Assist the Instrumentation Superintendent to ensure Compliance with the projects Safety objectives throughout the life of the project.
  
  • Ensure that in addition to quality and good engineering practice, planning and cost must be a permanent concern.
  
  • Maintain good relationships with Contractors, being flexible enough but also strict when necessary to achieve the objectives of the Project.
  
  • Liaise with Other disciplines, Safety, Cost, Planning and Administration sections to improve effectiveness of the overall Team.
  
  • Keep the Instrumentation Construction Superintendent informed of all events which may affect the successful completion of the project goals. Upon daily basis, report construction progress, equipment installation.
  
  • Support the Instrumentation Superintendent on site ensuring that the ESPCC Contractor is fully conversant with all Company project Electrical / Instrumentation related standards and procedures.
  Witness with EPCC Petrofact
  -cable insulation test
  -valves leak tests
  -PSV settings
  -Instrument erection
  -Cable trench
  -Icaps Inspection according to Petrofac Request
  -Cable trays inspection
  
  •
  

• PARIFEX - ICSS ENGINEER

  2013 - 2014 In Hyundai Offices South Korea
  
  ICSS ENGINEER
  Moho Nord
  Hull project
  
  Follow up FA from Hyundai Samho to review them
  Interface with Parifex France
  Create Fire & Gas CE Charts
  Create modify I/O List PID 's
  Create FA typical Start up Motors
  
  
  
  In Hyundai Offices South Korea ICSS ENGINEER
  Moho Nord
  Hull project
  
  Follow up FA from Hyundai Samho to review them
  Interface with Parifex France
  Create Fire & Gas CE Charts
  Create modify I/O List PID 's
  Create FA typical Start up Motors

• TOTAL CONGO - ICSS Engineer

  COURBEVOIE 2012 - 2013
  
  
  
  
  
  
  
  Arret N' Kossa Congo
  
  Remplacement des cartes triconex dans le cadre de la migration de DOS en Windows
  Création des OTP pour tester la logique des mimics
  Supervision offshore lors de l'arret

• TOTAL - CONSTRUCTION SUPERINTENDANT E/I PROJET WTU YEMEN

  COURBEVOIE 2012 - 2012

• TOTAL-EP YEMEN KHARIR SITE - LEAD INSTRUMENT COMMISSIONING LEADER

  2010 - 2012 From 15 February 2010 Lead instrument Commissioning Engineer for TOTAL Yemen 4X4 cycles CCU unit in Kharir,Prepare OTP’s and procedures according to TOTAL Specifications , follow up contractor progress day to day.Carry out all OTP on site ,Attent FATs in other country, Ariel gas compressor 3 stages start up DCS Yokogawa CS3000 Prosafe safety ESD&FG. Assist Precommissioning team to create Ecaps data base,Follow up Contrator Construction and witness all punch list Review and mark up all Vendors drawings

• TOTAL/SONANGOL/MAUREL-PROM/TOTAL/TOTAL - Lead Instument Commissionng Leader

  2001 - 2010 Jacques SENAQUE Married 2 children.Born 08.05.1949French nationality* Pont de Giret31160 ASPET FRANCE ( + 33 561954048 686402494jacques_senaque@hotmail.com PROFESSIONAL PROFILE20-years experience in Instrumentation Systems in Oil&Gas 8-years experience in Electricity and electro –mechanics+Electrical Supervisor5 years experience in Training courses1. Automation Certificates CNAM B level 19722. Metrology Certificates CNAM. IUT Physics 1971 (DUT Physical Measures 1971)International mobility:Middle EastAlgeria 5 yearsSaudi Arabia 2 yearsEgypt 1,5 yearsSyria 1,5yearsIran 4 yearsEmirates 3 yearsYemen since Feb 2010-AfricaCameroun 1,5 yearsGuinea 1,5 yearsCongo 2 yearsAngola 3 yearsAsia1,5 years Brunei CURRICULUMM VITAE Instrument Systems Supervisor(New works Pre-commissioning Commissioning,Maintenance,Engineering)From 15 February 2010 Lead instrument Commissioning Engineer for TOTAL Yemen 4X4 cyclesCCU unit in KharirPrepare OTP’s and procedures according to Technip basic procedures , follow up contractor progress day to dayCarry out all OTP on siteAttenf FATs in other country Ariel gas compressor 3 stages start upDcs Yokogawa CS3000 Prosafe safety ESD&FGAssist Precommissioning team to create Ecaps data baseFollow up Contrator Construction and witness all punch listReview and mark up all Vendors drawingsFrom 01 June 2008 up to 01/12/2009 Instrument New Works Supervisor Block 3 (ex Total ) and 2 (ex Chevron ) Cycle 4x4 Progisys Contractor ,Angola offshore 4X4Create commissioning folders and OTPFollow up all new works from Engineering Dpt in E/I activitiesLoop checkings +assistance to start up cf listing, :Dcs UPGRADE PACF4PLC rewamping expedition pumps PALP2Test separators rewampingReview, comment the preparation of Commissioning procedures, including OTP , FAT in CergyMark up in OpercomFinalize end of files and update plans2008 : HUET Helicopter under water escape training BFF Basic fire fighting PST Personal survival technique FA Elementary first aide H2S Risk management with Sulfuric HydrogenSince 05/12/2006 SONANGOL P&P AngolaInstrument Engineer& - Maintenance Department Block 3/05. Progisys ContractorJob Description:Maintenance in surface operation of 11 offshore platforms and 1 FSO (gas turbines, gas lift compressors, turbo pumps, surface well head, injection pumps, well test separator and production separator) + metering.Annual Instrumentation budget: 10 MUSDOverall Oil production > 100,000 barrels/dayActivites- Assistance to construction- Ensures that company safety policy (H.S.E.), operating procedures, instruction and methods are applied.- Maintenance activities : follow up spare parts, creating new items in SAP to replace obsoletes- Rewamping of all turbopumps Turbomeca for vibrations , put Bently 500 to replace obsolete schencks racks, full- rewamping of old Fire Gas detection in PAL-P2, upgrading old April SCADA system on PALF2 by PC view 32 version 8)- Cmms=SAP and Data StreamMaurel-Prom Zetah Congo Gas Oil Separator Plant 60 000bl/days from 07/06/2006 up to 05/12/2006(SITE Mboundi in jungle)Electrical Instrument SupervisorStatus 4weeks on / 4weeks offIn charge of 4 electrical instrument techniciansStart up of Separators , Degasors and Scrubbers phase Mboundi 4Follow up new works phase 5 (Desalters , Water treatment, WaterInjection) for instrumentationMaintenance activities and follow up spare partsCimplicity DCS and GE Fanuc 90/20 PLCSea water treatment start upDue to cerebral paludism I have been hospitalised in criticalconditions to Tropical Deases HospitalIn Toulouse and I have been obliged to resign (Mboundi is localizedin jungle )Dietsmann International –Congo offshore oil fields from 27/09/04 up to 07/06/2006Instrument Systems Supervisor3 Fields ,11 plateformsIn charge of 12 instruments technicians including one senior expat Systems specialist and one expat Instrument specialistManage work orders and spare parts in SAP (Maintenance Management System)Follow up daily routine ,and on call ni

Formations

• IUT Mesures Physiques (Caen)

  Caen 1969 - 1971 Physical Measures
  
  2 years after Bachelor of Science
  
  DIPLOMS DUT MESURES PHYSIQUES
  
  CNAM METROLOGY CERTIFICATES CAEN UNIVERSITY 1972
  
  CNAM AUTOMATISATION CERTIFICATES ENSAM AIX PROVENCE 1973

Réseau

• Alain ETIENNE

• Christian RUPRECHT

• Christophe D'URBAL

• Compte INACTIF

• Dora CRÉATION

• Gilles POUBEL

• Loïc PONDAVEN

• Mohamed ADDA

• Sheherazad DESBANS

• Zeki DEMIRYUREK